AMERCOAT 253 PDF
Amercoat Chemical Resistant Lining. Product Data/. Application Instructions. • High Solids, high performance epoxy novolac also defined. Amercoat – Download as PDF File .pdf), Text File .txt) or read online. This Safety Data Sheet is prepared in accordance with Annex II to Regulation ( EC) No. / AMERCOAT CHEMICAL LINING CURE.
|Published (Last):||7 July 2013|
|PDF File Size:||9.56 Mb|
|ePub File Size:||18.71 Mb|
|Price:||Free* [*Free Regsitration Required]|
Topcoat and Amercoat to be sure. Due to the long curing time at this temperatures when accelerator is not used, it is recommended that temperatures above 50 F are expected within 12 hours of application.
Amercoa incorporate glass flake additive under agitation over minutes to ensure the glass flake is thoroughly mixed. For aged inorganic zinc coatings, spot blast rusted areas in accordance with the surface preparation instructions before touching up with Dimetcote 9VOC. Agitate with a power mixer for minutes until completely mixed.
Aged epoxy coatings may require abrading prior to applying Amershield. Higher surface temperatures shorten the maximum recoat window.
Protective Coatings Product Catalog AMERCOAT. A PPG brand – PDF
Offshore Information Sheet No. Care and Maintenance for Wood Flooring The finishing technology used for Tarkett wood floorings makes them the best choice for easy maintenance.
Please refer to Information Bulletin for further information. Do not allow Prep 88 to dry on the surface. View companies and products as a list. Use the form below or send an email to Name Phone Email 523 Your privacy We will only use this information to process your enquiry. Periodically check wet film thickness during application with a steel rule depth gauge or other suitable wet film thickness gauge.
For automatic application a substrate temperature of 86 F 30 C is recommended The temperature of the substrate should be at least 5 F 3 C above the dew point. Aged coatings All surfaces must be amfrcoat, dry, tightly bonded and free of all loose paint, corrosion products or chalky ameroat. All dry spray must be removed from the surface by amsrcoat or light abrading.
HTC makes no other warranties, expressed or implied, such as warranties of merchantability or fitness for a particular purpose. Area should be sheltered from airborne particulates and pollutants. However, particular attention must be paid to surfaces exposed to sunlight where chalking may be present. Aged Coatings and Repairs Ensure the coating system is sound and well adhered. There is no data available for this product.
Amercoat 253 pdf
PPG / AMERCOAT EPOXY POLYURETHANE COATINGS PRIMERS & LINERS
Blast with an angular abrasive to yield a surface profile of mils. Penetrants Forms chemical bond with the walls of the amerocat, the More information.
You can feel confident More information. Thin according to local air regulations.
Surface temperatures should be monitored, especially with sun-exposed or otherwise heated surfaces. The responsibility of the engineer is. Hi-Temp Coatings Technology, Inc. Apply two coats of Hi-Temp VS at 2 to 2. Avoid mechanical damage and abrasion. Feather the edges of tightly adhered, intact coatings at the perimeter of repair areas.
Warranty HTC warrants that its products are free from defects in material and workmanship. This also allows Hi-Temp VS to have superior color stability as compared to most generic silicone topcoats, which tend to discolor at elevated temperatures.
Wait approximately 3 to 5 minutes, keeping the area moist with Amerase, then wipe with clean rags.